Leak Detection Sensor Test for Aluminum Paste | YHSP-SA Electronic Leak Point Sensor

Flux leak detection sensor test using Yoohantech YHSP-SAR Electronic Leak Point Sensor. This industrial chemical leak detection test verifies no false alarms in water and confirms fast Flux detection within approximately 5 seconds. Suitable for leak detection sensor, chemical leak detection, inorganic solution leak detection, industrial leak detector, and chemical spill monitoring applications.

Technical Note | Flux Leak Detection Test

This video demonstrates an industrial leak detection sensor test using Flux and the YHSP-SAR Electronic Leak Point Sensor. The test verifies no false alarms in water, fast chemical response, and reliable alarm activation for chemical leak detection applications.

Flux Leak Detection Test Using the YHSP-SAR Electronic Leak Point Sensor

Yoohantech continuously performs leak detection tests using real industrial chemicals to verify sensor performance, reliability, and response characteristics in actual operating environments.

This test was conducted using Flux to evaluate the leak detection capability of the YHSP-SAR Electronic Leak Point Sensor and to verify its immunity to water-induced false alarms.

Test Overview

• Test Material: Flux
• Sensor Model: YHSP-SAR
• Initial Sensor Reading: 31
• Alarm Threshold: 500
• Test Purpose: Verification of Flux leak detection performance
• Detection Time: Approximately 5 Seconds

Water Response Test

Before testing the Flux sample, the sensor was immersed in water for approximately 30 seconds to verify whether any false alarm would occur.

The sensor showed no response and no alarm activation during the water test.

This demonstrates the sensor's ability to distinguish water from target chemicals and minimize false alarms caused by moisture or rainwater.

Flux Leak Detection Test

After removing moisture from the sensor surface, the sensor was immersed in the Flux sample and the response time was measured.

The sensor reading increased rapidly from the initial value of 31 and reached the preset alarm threshold of 500 in approximately 5 seconds.

Once the threshold was reached, the alarm was activated immediately, confirming reliable leak detection performance.

Test Results

• Water: No Response After 30 Seconds
• Flux: Detected in Approximately 5 Seconds
• False Alarms: None
• Alarm Activation: Successful

Key Features of the YHSP-SAR Leak Detection Sensor

• Optimized for Acids, Alkalis, and Inorganic Solutions
• No False Alarms in Water
• Chemical-Family-Specific Detection Technology
• Fast Response Performance
• Reusable Sensor Design
• Reduced Maintenance Costs
• Suitable for Industrial Chemical Leak Detection Applications

Conclusion

This test confirms that the YHSP-SAR Electronic Leak Point Sensor can reliably detect Flux leaks while maintaining immunity to water-induced false alarms.

The sensor successfully detected the Flux sample within approximately 5 seconds, demonstrating its fast response capability and suitability for industrial leak detection applications.

Yoohantech continues to provide real-world leak detection test data to help customers select the most effective leak detection solution for their specific chemical environments.

For more information, visit: www.yoohantech.com