This video demonstrates an industrial leak detection sensor test using aluminum paste and the YHSP-SA Electronic Leak Point Sensor. The test verifies no false alarms in water, reliable organic solvent detection, and successful alarm activation within approximately 20 seconds.
Yoohantech continuously conducts leak detection performance tests using real industrial chemicals to verify sensor reliability, response characteristics, and practical field performance.
This test evaluates the leak detection capability of the YHSP-SA Electronic Leak Point Sensor using aluminum paste provided by Korea Camtech.
Before testing the aluminum paste sample, the sensor was immersed in water for approximately 30 seconds to verify whether any false alarm would occur.
The sensor showed no response and no alarm activation during the water test.
This demonstrates the sensor's ability to distinguish water from target chemicals and prevent false alarms caused by moisture, condensation, or rainwater.
After removing moisture from the sensor surface, the sensor was immersed in the aluminum paste sample and the response time was measured.
The sensor reading increased from the initial value of 1.05 and reached the preset alarm threshold of 2.10 in approximately 20 seconds.
Once the threshold was reached, the alarm was activated immediately, confirming reliable leak detection performance.
This test confirms that the YHSP-SA Electronic Leak Point Sensor can reliably detect aluminum paste while maintaining immunity to water-induced false alarms.
The successful detection of aluminum paste within approximately 20 seconds demonstrates the sensor's suitability for industrial leak detection, chemical spill monitoring, and process safety applications.
We confirm applicability and recommend solutions based on your target liquid and site conditions.
Setting the trusted standard for liquid leak detection in industrial facilities.