Electronic Leak Point Sensor

💡 Key Summary: Electronic leak point sensor for acids, alkalis & inorganic solutions, designed to reduce nuisance alarms

YHSP-SAR is an electronic liquid leak point sensor that quickly detects floor leaks of acids, alkalis, and inorganic solutions. It is designed to reduce unnecessary alarms in water-exposed environments (rain, condensation, etc.), improving operational efficiency. With a structure that can be washed and reused, it helps reduce maintenance burden. When used with a dedicated controller module, it enables real-time monitoring of leak events, making it suitable for chemical spill prevention and building a reliable safety monitoring system.

For Acids, Alkalis & Inorganic Solutions | Controller Module Required

On-site monitoring solution to help prevent chemical incidents: electronic leak point sensor

YHSP-SAR: Selective detection technology for acids, alkalis & inorganic solutions.

YHSP-SAR is a professional electronic leak point sensor designed to detect even small floor leaks quickly and accurately. It focuses on acids, alkalis, and inorganic solutions, delivering an alarm signal at the earliest stage of leakage to support rapid response and improve safety for equipment, assets, and workplaces.

KEY FEATURES

Differentiated Technology (Key Features)

💧 Nuisance-Alarm Reduction Design

• Designed to reduce unnecessary reactions in typical water environments (rain, condensation, etc.) and respond selectively to leaks of acids, alkalis, and inorganic solutions. (※ Water-detection option can be added depending on site requirements)

⚡️ Real-Time Ultra-Fast Detection

• As soon as liquid enters the bottom area of the sensor, a specially designed conductor reacts, enabling real-time detection without missing even small leaks.

♻️ Washable & Reusable for Better Cost Efficiency

• No immediate disposal or replacement is required after leak detection. The sensor is designed for reuse after washing, helping reduce maintenance cost and improve operational efficiency.

🌐 Complete System Monitoring

• When integrated with a dedicated controller module, the system can monitor not only leak events but also cable breaks and sensor fault status in real time, improving system reliability.

💪 Durability Optimized for Industrial Sites

• Designed to diagnose leaks, cable breaks, and sensor damage in real time through controller-module integration. If an abnormal condition occurs, it automatically generates an alarm signal so operators can act immediately.

🎥

Watch Real Leak Detection Test Videos

View test footage verified under real leak conditions, including sensor response and alarm operation.

▶️ View Leak Test Videos

TECHNICAL SPECIFICATIONS

Item	Details
Model	YHSP-SAR (Electronic Leak Point Sensor)
Power Supply	DC 5V (supplied by controller module)
Measurement Range	0–3000
Output Type	Phase Shift
Detection Targets	Acids/alkalis (sulfuric acid, hydrochloric acid, nitric acid, caustic soda, etc.), inorganic solutions (hydrogen peroxide, etc.), and other conductive liquids
Dimensions	Ø68 x 32 (± 0.5)mm
Materials	SUS304 (stainless steel), PP (polypropylene), and other chemical-resistant materials
Installation Areas	Indoor/outdoor hazardous storage, beneath chemical piping, around tanks, trenches, etc.
Operating Temperature	-20 to 60˚C
Detection Performance	• Alkali solutions: caustic soda (NaOH) 5%–50% (response within 10 sec) • Acid solutions: 7%–98% sulfuric acid, hydrochloric acid, nitric acid, hydrofluoric acid, etc. (response within 10 sec) • Inorganic solutions: hydrogen peroxide, etc. (response within 20 sec)
Key Points	• Non-reactive technology: prevents nuisance alarms by not reacting to water (can be configured to react to water if needed) • System integration: works with a dedicated controller module • Cost efficiency: reusable after simple water cleaning • Reliability: real-time alarms for cable breaks and sensor damage