Intrinsically Safe Electronic Leak Point Sensor

No Response to Water Optimized detection by chemical family for organic solvents and oils.

💡 Key Summary: Intrinsically Safe Electronic Leak Point Sensor – For Organic Solvents & Oils

YHSP-SA-Ex is an intrinsically safe electronic leak point sensor designed for chemical-family specific detection of organic solvents and oils on-site. Based on Ex ia intrinsically safe certification (Ex ia IIC T6, KCs certified), it can be applied in hazardous areas including Zone 0. It features a selective detection structure designed to reduce nuisance alarms caused by water (rain, condensation, washdown water). In addition, the replaceable floor-sensor cartridge design helps reduce maintenance time and supports lower lifecycle cost. By improving detection reliability for early-stage leaks of solvents and oils, it strengthens overall safety management in critical facilities.

For Organic Solvents & Oils | Optimized Detection by Chemical Family | Controller Module Required | KCs Certified

🛡️ KCs Intrinsically Safe Certification | Ex ia IIC T6

Chemical-family specific detection for organic solvent & oil leaks, designed to reduce nuisance alarms

YHSP-SA-Ex: optimized detection by chemical family based on surface-tension technology

Designed to reduce nuisance alarms in water-exposed environments (rain, condensation, washdown). The YHSP-SA-Ex intrinsically safe electronic leak point sensor is optimized for the organic solvent and oil chemical family in hazardous areas to support rapid response and safe facility operation from the earliest stage of leakage.

CORE FUNCTIONS

🔬 Optimized Detection by Chemical Family (Organic Solvents & Oils)

• Designed for chemical-family specific detection of organic solvents and oils while reducing the impact of rain, humidity, and washdown water. Even around outdoor tanks or in humid environments, it helps reduce nuisance alarms and improve operational efficiency.

🔧 Replaceable Sensor Tip Design (Cost Saving)

• After a leak event, you do not need to replace the entire sensor. Simply replace the contaminated floor-sensor cartridge (sold separately) for quick recovery, reducing maintenance time and cost.

🛡️ Durability Optimized for Industrial Sites (High Durability)

• With impact resistance and noise-shielding design, it supports stable detection signals even in vibrating environments or where electrical interference may occur.

💡 Real-Time Self-Diagnosis (Self-Diagnosis)

• Works with the controller module to monitor cable breaks and sensor abnormalities in real time. If an issue is detected, it outputs an alarm immediately. Designed for 24/7 monitoring where no safety gaps are acceptable.

⚙️ Intrinsically Safe Leak Detection System Configuration (System Configuration)

• Intrinsically Safe Ex ia Protection

Designed with Ex ia intrinsically safe protection, applicable to hazardous locations including Zone 0 where explosive gases may be continuously present. It is intended to support compliant and stable field operation.

• Required System Components

For compliance and safe operation, the system must be configured with a dedicated leak detection controller module, Zener barrier, and protective housing.

📄

Product Brochure

📥 Download Brochure

🎥

Watch Real Leak Detection Test Videos

View test footage verified under real leak conditions, including sensor response and alarm operation.

▶️ View Leak Test Videos

TECHNICAL SPECIFICATIONS

Item	Details
Model	YHSP-SA-Ex (Intrinsically Safe Electronic Leak Point Sensor)
Power Supply	DC 2.5V (supplied by controller module)
Measurement Range	A1: 0–100.0 MΩ / A2: 0–60.00 MΩ / A3: 0–6.000 MΩ
Output Signal	Level Shift (voltage shift method)
Detection Targets	Organic solvent and oil chemical family: organic solvents, oils, VOCs, etc. (NMP, MEK, toluene, gasoline, benzene, xylene, etc.)
Dimensions	Ø68 x 32mm (± 0.5)
Materials	PP (polypropylene), carbon, and other chemical-resistant materials
Applications	Hazardous areas such as around indoor/outdoor piping & tanks, chemical storage facilities, etc.
Operating Temperature	-20˚C – 60˚C
Detectable Liquids	Insulating oil, engine oil, tar oil, TDA, TDI, OMCTS, benzene, xylene, toluene, and all organic solvents & oils (response within 10 sec)
Key Points	• Optimized detection by chemical family: organic solvents and oils • Reduced nuisance alarms in water/humidity environments • System integration: works with a dedicated controller module • Cost saving: replaceable floor-sensor cartridge improves maintenance efficiency • Safety monitoring: immediate alarm on cable break (Break) or sensor damage