[Performance Verification] Instant Diesel Leak Detection! Test of the Integrated Organic Solvent Sensor YHSM-A01

1. Overview of the Leak Detection Performance Test

• Test Product: YHSM-A01 integrated organic solvent leak detector developed by Yoohantech

• Product Features: This is an all-in-one design with the alarm module built directly into the sensor. Without a separate control panel, it can directly operate external alarm devices such as a warning beacon, making it possible to build a cost-effective leak detection system.

• Test Purpose: This test verifies how quickly the sensor can detect a diesel leak in industrial environments and whether it avoids false alarms when exposed to water, such as rainwater or condensation.

2. Test Procedure and Result Analysis

Test 1: False Alarm Prevention Verification (Water Response Test)

• Procedure: The leak sensor was immersed in a container of water for approximately 20 seconds.

• Result: The warning beacon connected to the sensor did not activate at all (no response).

• Analysis: This objectively confirms that the sensor does not generate a false alarm due to rainwater or moisture.

Test 2: Diesel Leak Detection Test

• Procedure: After completely drying the sensor, diesel was applied to the sensing area with a pipette to simulate an oil leak incident.

• Result: As soon as the diesel came into contact with the sensor, the warning beacon turned on immediately and a strong leak alarm was activated.

• Analysis: The sensor reacts quickly and accurately to diesel, the target detection substance, helping secure critical response time in the event of a leak accident.

3. Final Conclusion

This test has demonstrated that the YHSM-A01 leak detector provides the following performance benefits:

• High selectivity with no response to water, helping prevent false alarms.

• Immediate response to diesel, the target organic solvent, with direct alarm output.

• Easy and economical installation, since an alarm system can be configured without a separate control unit.