safety, driven by dedication, and delivering innovation.
💡 Key Summary: Flux Leak Detection Test Video | Electronic Leak Point Sensor
This flux leak detection test video demonstrates how an electronic leak point sensor responds to a flux material under actual test conditions. The test verifies sensor response and alarm operation in a local leak scenario, while also confirming no response in water. This type of point leak detection is suitable for early leak monitoring at equipment bottoms, pipe joints, trays, and drain points to help protect equipment and improve plant safety.
🧪 Test Conditions
- Test Material: Flux (inorganic solution type) / Reference condition: water
- Detection Method: Electronic point-type leak detection for precise local monitoring
- Test Method: Apply the liquid to the sensing area and check the value change and alarm operation
- Test Purpose: Verify fast response, alarm operation, and site applicability for chemical leak monitoring
📊 Test Results
- No response was observed in water even after approximately 30 seconds
- The alarm was triggered immediately in the flux condition, with a response time of about 2 seconds
- Normal alarm operation was confirmed when the threshold was reached
- Fast point detection makes early-stage leak monitoring possible
- False alarms can be minimized through proper threshold tuning
🧩 Application Points
Flux leaks often collect first around equipment bases, trays, pipe connections, flanges, pumps, and valves, so an electronic point-type leak detector can provide fast detection at the early stage of leakage. It is effective for equipment protection and safety management in semiconductor, electronics, display, and industrial plant environments.
For more industrial leak detection sensors and related models, please visit the product page: /en/sub2_1
⚠️ Notes / Caution
- The threshold may vary depending on temperature, contamination level, viscosity, and installation location, so initial adjustment is recommended
- In environments where the sensing area is frequently contaminated, regular inspection and cleaning are recommended
- For processes where water and chemicals may be mixed, an on-site POC test is recommended to determine the optimal threshold setting
Liquid Leak Detector: Technical Inquiry
We confirm applicability and recommend solutions based on your target liquid and site conditions.
Setting the trusted standard for liquid leak detection in industrial facilities.
I want to
Defining the Trusted Standard in Liquid Leak Detection for Industrial Safety.