Industrial alkaline chemical leak detection test using the YHSP-SAR Electronic Leak Point Sensor. This industrial leak detection sensor demonstrates No False Alarms in Water and detects alkaline chemical leaks within approximately 2 seconds. Suitable for chemical leak detection, industrial leak detection, liquid leak detection, chemical spill detection, semiconductor facilities, battery manufacturing plants, chemical processing plants, laboratories, wastewater treatment facilities, and industrial safety applications.

Technical Note | Alkaline Chemical Leak Detection Test

This video demonstrates the YHSP-SAR Electronic Leak Point Sensor detecting an alkaline chemical leak within approximately 2 seconds, while maintaining No False Alarms in Water.

Designed for chemical leak detection, industrial leak detection, and liquid leak detection systems, the YHSP-SAR sensor is optimized for alkalis, acids, and inorganic solutions in chemical plants, semiconductor facilities, battery manufacturing plants, laboratories, and industrial process areas.

Industrial Leak Detection Sensor with No False Alarms in Water

The YHSP-SAR Electronic Leak Point Sensor is designed for reliable detection of alkaline chemicals, acids, and inorganic solutions while minimizing false alarms caused by water.

This test demonstrates the sensor’s ability to distinguish between water and target chemicals, providing rapid and reliable leak detection for industrial facilities.

Test Overview

Test Chemical: Alkaline Chemical Solution

Sensor Model: YHSP-SAR Electronic Leak Point Sensor

The test verifies water resistance, alkaline chemical detection capability, response time, and chemical-specific leak detection performance.

Water Exposure Test

The sensor was exposed to water before introducing the target chemical. During the test, no alarm was generated and the sensor maintained stable operation.

✔ No False Alarms in Water
✔ Water and chemical discrimination confirmed
✔ Reduced risk of nuisance alarms caused by cleaning water or condensation

Alkaline Chemical Leak Detection Test

After the water test, an alkaline chemical was applied directly to the sensing surface. The sensor detected the chemical leak and activated an alarm within approximately 2 seconds.

✔ Detection within approximately 2 seconds
✔ Immediate leak recognition
✔ Fast alarm activation
✔ Reliable chemical-specific detection

Key Features

No False Alarms in Water
Designed to ignore water while responding to target chemicals.

Optimized Detection by Chemical Family
Dedicated sensing technology for acids, alkalis, and inorganic solutions.

Fast Response
Detects leaks within seconds of chemical contact.

Leak Point Detection
Detects leaks directly at the source before contamination spreads.

Reduced Maintenance Costs
Washable and reusable sensor design helps lower operating costs.

Recommended Applications

Chemical Processing Plants · Semiconductor Manufacturing Facilities · Battery Manufacturing Plants · Industrial Chemical Storage Areas · Research Laboratories · Wastewater Treatment Facilities · Industrial Process Equipment

Test Summary

This test confirms that the YHSP-SAR Electronic Leak Point Sensor can successfully distinguish water from alkaline chemicals while providing leak detection within approximately 2 seconds.

The results demonstrate its suitability for industrial environments where reliable chemical leak detection and reduced false alarms are essential.