TBHP Leak Detection Test: Fast Response in About 7 Seconds

This video demonstrates a TBHP leak detection test using Yoohantech’s organic solvent leak sensor YHSP-SA, developed for industrial liquid leak detection in chemical plants, semiconductor facilities, and other hazardous process environments. The test shows how quickly and reliably the sensor responds to TBHP under actual leak detection conditions.

## Step 1. False Alarm Prevention Test: No Response in Water

First, a water exposure test is carried out to verify sensor stability and detection accuracy. This step checks whether the sensor remains inactive in non-target liquid conditions.

• Process (0:33): The leak detection sensor is fully immersed in water for 20 seconds while its response is observed.

• Result (1:01): Even after 20 seconds, the leak alarm system shows no response. This demonstrates that the sensor remains stable in water and helps prevent false alarms caused by moisture or non-target liquids.

## Step 2. TBHP Leak Detection Performance: Fast Response in About 7 Seconds

Next, the sensor is tested with TBHP used in an actual industrial environment. This stage verifies whether the organic solvent leak detector can respond quickly and reliably to a hazardous chemical leak. For more information about Yoohantech liquid leak detection products, please visit the product page.

• Preparation (1:08): After wiping off the water, the sensor is prepared for immersion in the TBHP container.

• Process (1:34): The sensor is immersed in the TBHP solution, and the response time is measured.

• Result (1:44): In about 7 seconds, the sensor value reaches the set alarm threshold, activating the leak alarm and warning light.

• Analysis (1:54): From the initial sensor value of 1.0450 to the alarm threshold of 2.0450, the time required to trigger the alarm is approximately 7 seconds. This confirms a fast and dependable response to TBHP leakage.

## Final Conclusion: Reliable Industrial Leak Detection for TBHP

This TBHP test demonstrates that Yoohantech’s YHSP-SA leak detection sensor provides fast and accurate response performance for hazardous chemical leak detection in industrial applications.

A response time of about 7 seconds is not just a specification. It is a verified test result.