Mixed Organic Solvent Leak Detection Test: Dichloromethane + Toluene Detected Within 15 Seconds

This video presents a mixed organic solvent leak detection test using dichloromethane (DCM) and toluene with the YHSP-SA organic solvent leak sensor from Yoohantech. For buyers looking for a reliable chemical leak detection sensor, organic solvent leak detection system, or industrial leak monitoring solution, this test demonstrates two key performance factors: no false response in water and fast alarm activation within 15 seconds in a mixed solvent environment.

Performance Test Highlights

1. Step 1: Water Stability Test | No False Alarm for 1 Minute

   • To verify sensor stability, the YHSP-SA leak detection sensor is immersed in water for approximately 1 minute. Even after continuous exposure, the sensor shows no response, confirming stable operation and resistance to false alarms caused by water, moisture, or condensation.

2. Step 2: Mixed Organic Solvent Leak Detection Test

   • The sensor is then exposed to a mixed solvent consisting of dichloromethane (DCM) and toluene. This test simulates a more complex industrial environment in which multiple organic solvents may be present at the same time.

3. Result: Reliable Alarm Within 15 Seconds

   • The sensor responds quickly to the mixed solvent and activates the leak alarm in less than 15 seconds. This confirms that the YHSP-SA can maintain fast and accurate detection performance even in mixed chemical conditions.

Test Data Summary

• Sensor Model: YHSP-SA (electronic point leak detection sensor for organic solvents)

• Test Material: Dichloromethane + Toluene (mixed organic solvent)

• Initial Sensor Value: 1.13

• Alarm Setpoint: 1.25

• Response Time: Within approximately 15 seconds

Explore More Leak Detection Products

If you are looking for a dependable organic solvent leak detection system or chemical leak detection solution for industrial facilities, please visit our product page here: Leak Detection Product Page.

Why This Test Matters in Real Industrial Environments

In real production sites, leak conditions do not always involve a single chemical. Mixed solvents are commonly used in semiconductor plants, chemical processing lines, and industrial cleaning systems. This is why a mixed organic solvent leak detection test is important. It shows whether a sensor can deliver reliable performance not only in simple test conditions, but also in more realistic and demanding environments.

Conclusion: Fast and Stable Leak Detection for Mixed Solvent Conditions

This video confirms two important strengths of the YHSP-SA from Yoohantech.

1. False Alarm Prevention: No response in water, supporting stable operation in real industrial environments.

2. Fast Mixed-Solvent Detection: Rapid response to dichloromethane and toluene within 15 seconds, enabling early warning and faster action.

In short, the YHSP-SA is a practical industrial leak detection solution for organic solvents and mixed chemical environments, designed to improve safety, reduce false alarms, and support reliable leak monitoring in high-risk facilities.